NEC Univerge MH250 - FEATURES; TO USE CALL FORWARDING - ALL CALLS; TO USE CALL FORWARDING - DON’T ANSWER

13
4. FEATURES
This section explains how to use features on your
phone. Some of features, however, require the entry of
Access Code, which may differ depending on your
office. Please contact your network administrator as to
the information of access codes.
• TO USE CALL FORWARDING -
ALL CALLS
This feature automatically forward all incoming calls to
a predetermined phone. When this feature has been set
on your phone, all incoming calls will be forwarded to
the destination regardless of the busy or idle status of
your phone.
To Set:
- Enter CALL FORWARDING - ALL CALLS (SET)
access code.
- Press key and then hear Special Dial Tone.
- Dial a phone number to which you want to forward
incoming calls and then receive Service Set Tone
(This feature has been set).
- Press key.
To Cancel:
- Enter CALL FORWARDING - ALL CALLS
(CANCEL) access code.
- Press key and then receive Service Set Tone
(The feature has been cancelled).
• TO USE CALL FORWARDING -
DON’T ANSWER
This feature automatically forward an incoming call to
a predetermined phone only when the call is not
answered within a predetermined period time (i.e. 30
seconds).
To Set:
- Enter CALL FORWARDING - DON’T ANSWER
(SET) access code.
- Press key and then hear Special Dial Tone.
- Dial a phone number to which you want to forward
incoming calls and then receive Service Set Tone
(This feature has been set).
- Press key.
To Cancel:
- Enter CALL FORWARDING - DON’T ANSWER
(CANCEL) access code.
- Press key and then receive Service Set Tone
(The feature has been cancelled).
POWER
Cancel this feature when it is not required. If
not, all incoming calls may be forwarded to the
destination until you cancel this feature.
TIP
01:AbcDefg
02:HigkLmn
03:OpqrStu
POWER