NEC Univerge MH250 - Rtp Alarm

49
• RTP ALARM
Factory Default: Off
The handset can provide alarm if RTP packet loss is
suspected.
- Press soft key in standby mode to display
the main menu.
- Press key to select “04. Setting” and then press
soft key.
- The handset displays the Setup Menu.
- Press key to select “02. Sounds”.
- Press soft key. Sounds menu appears.
- Press key to select “09. RTP Alarm” and then
press soft key.
- Select ON or OFF by using key and then press
soft key.
If RTP packet loss exceeds 20% or greater,
RTP alarm is activated.
TIP
01:AbcDefg
02:HigkLmn
03:OpqrStu
Func
OK
PM 02:58
OK Back
Menu
02. Phone Book
03. Speed Dial
01. Call Log
04. Setting
PM 02:58
OK Back
Setting
02. Sounds
03. Date & Time
01. Display
04. Password
05. Language
OK
OK
PM 02:58
OK Back
Sounds
07. Key Click Tone
08. MOH Select
06. Call Volume
09. RTP Alarm
OK
PM 02:58
OK Back
RTP Alarm
Off
On