NEC Univerge MH250 - PASSWORD

59
•PASSWORD
Factory Default: 0123 (User)
You can set a password that is used to lock/unlock the
handset.
- Press soft key in standby mode.
- Press key to select “04. Setting” and then press
soft key.
- The handset displays the Setting menu.
- Press key to select “04. Password”.
- Press soft key to open Password menu.
- Select “01. User” by pressing key and then press
soft key.
- Enter the old password and then press soft
key.
- Enter the new password (four numeric characters)
and then press soft key.
- Enter the new password again and then press
soft key.
The administrator password is used for net-
work administrator, or maintenance personnel
to set network data.
Use four numeric characters for the password.
TIP
01:AbcDefg
02:HigkLmn
03:OpqrStu
TIP
01:AbcDefg
02:HigkLmn
03:OpqrStu
Func
OK
PM 02:58
OK Back
Menu
02. Phone Book
03. Speed Dial
01. Call Log
04. Setting
PM 02:58
Enter Back
Setting
02. Sounds
03. Date & Time
01. Display
Func
04. Password
05. Language
OK
OK
PM 02:58
OK Back
Password
02. Administrator
01. User
05. Adjust
OK
PM 02:58
OK Back
Old Password
****
123
4/4
OK
PM 02:58
New Password
****
OK
PM 02:58
Confirm Password
****