Necta Canto Plus Espresso - GSM Communication and Up-Key Management; GSM Communication Setup; Up-Key Setup File Transfer; Save Configuration to Up-Key

© by N&W GLOBAL VENDING S.p.A. 41 10 2009 3325 - 00
COMMUNICATION
COMMUNICATION
UP-KEY
GSM
BANK NUMBER
TECHNICIAN> X.X
up-key
seTup managemenT
upkey -> vending machine
After having inserted the Up key into the plug on the
C.P.U. board, this function is used to select the setup le
from the list on the display. Press the Enter key to load
the setup le you have selected on the machine.
vending machine ->upkey
After having inserted the Up key into the plug on the
C.P.U. board, this function is used to save on the Up key
a setup le with the same conguration currently avail-
able on the machine.
Please specify the name you wish to assign to the le
(e.g.: CANTO000.STP)
deleTe
Use this function to delete one or more than one setup
le on the up key you have inserted
deleTe all
Use this function to delete all the setup les on the up
key you have inserted.
upkey sTaTisTics managemenT
vending machine ->upkey
Conrm this function after having inserted the Up key
into the plug on the C.P.U. board to save on the up key
the statistics le with all the statistical data currently
available on the vending machine. Please specify the
name you wish to assign to the le (e.g.: CANTO000.
STA).
deleTe
Use this function to delete one or more than one statis-
tics le on the up key you have inserted.
deleTe all
Use this function to delete all the statistics les on the up
key you have inserted.
gsm
(Global System for Mobile communications)
The control software can send a signal of faulty machine,
“prealarms” or “ending product” via GSM modem after
a (programmable) well-dened number of dispensing
cycles of a given product.
pin code
Function used to programme the identication code that
will be sent to the GSM modem (optional) as soon as
the machine is powered on.
Threshold seTup
Function used to dene the number of pieces or grams
of powder of a well-dened product, after which to signal
an “ending product” prealarm via modem.
counTer reseT
Function used to reset the counters intended to manage
pre-alarms.
Bank numBer
The bank number (from 1 to 7) is intended to univocally
dene the machines acting as a “GSM slave”, i.e. send-
ing the data by means of the “master” machine modem.
0 is intended to identify the machine directly connected
with the modem, i.e. the “GSM master”, in a bank.