IJ25 Postage Meter User's Guide 11
MEMORY SETTINGS
INTRODUCTION
To program a commonly used print combination proceed as for the following example:
Programming a Memory Function
Choose your preferred print combination:
e.g. Value 33 cents + Message URGENT
First select MESSAGES (see page 10).
Then select postage value (see page 7).
With preferred print combination displayed,
Press and Hold
for at least two seconds,
select the memory location key
or as required.
Press to confirm.
If the selected memory location has a previously
programmed function, the following display will be
observed.
To replace a memory program, press
, or press
to exit and start over to select a new location .
Recall a Memory Function
To recall a memory function, Press and Release ,
the following display will be observed.
Select the appropriate memory key or .
Press
to confirm.
MEMORY SAVE
{ 2 }
Ready 0.33
12/12/00
REPLACE MEMORY?
2
MEMORY RECALL
{ 1 }
To Next Page
Loading...
Need help?
General
