IJ25 Postage Meter User's Guide 21
REPLACINGANINKCARTRIDGE
Carefully withdraw the used cartridge and discard.
Remove the new cartridge from its packaging
and peel off the Blue tape seal that protects the
print head.
Place the new cartridge into its holder as
illustrated and press gently at the bottom of the
cartridge with yourthumb until it is fullyinserted.
Close the blue latch and press gently until it
locks the cartridge in place.
Close the top cover and press:
The following display will now be observed
Notes:
The ink charging process may takea short whileto complete, duringthis time the machine
may produce some mechanical sounds, this is normal.
Once installed, do not open the blue latch again until you need to fit a new cartridge.
If the ink cartridge is not installed properly the machine will not work.
After a short period of time, you will be prompted to
produce a test print:
Insert a blank envelope or card to make a test print
Remove the envelope or card.
The following display will now be observed:
Now enter the number that corresponds to the
straightest vertical line (for the example above line 5).
Press
to return to
Ready
mode.
INSERT ITEM
ALIGNMENT
_
PLEASE WAIT
To Next Page
Loading...
Need help?
General
