POC-200 Series User’s Manual
Copyright © 2014 Neousys Technology Inc. All Right Reserved. Page 11 of 78
USB
1
x
U
S
B 3.0 port via native USB3 controller
2x USB 3.0 ports via Renasas uPD720202 USB3 host controller
1x USB 2.0 port
Audio 1x Speaker-out
DIO 4-CH 5V TTL DI + 4-CH 5V TTL DO
Internal I/O Interface
Mini-PCIe 1x mini PCI Express slot with USIM socket
Storage Interface
SATA HDD 1x internal SATA port for 2.5” HDD/SSD
Power Supply
DC Input Built-in 8~35 VDC DC input
Input Connector 2-pin pluggable terminal block for DC input
Power Consumption
Typical: 7.68W (0.32A@24V)
Full-loading: 13.44W (0.56A@24V)*
Mechanical
Dimension 149mm (W) x 105 mm (H) x 54 mm (D)
Weight 1.1 kg (with one 2.5” SATA HDD)
Mounting Wall-mount (Standard)
DIN-rail mount (Optional)
Environmental
Operating
Temperature
-30°C ~ 70°C with SSD, 100% CPU loading **/***
-10°C ~ 60°C with HDD, 100% CPU loading **/***
Storage
Temperature
-40°C ~85°C
Humidity 10%~90% , non-condensing
Vibration Operating, 5 Grms, 5-500 Hz, 3 Axes (w/ SSD, w/o add-on card, according to
Shock
Operating, 50 Grms, Half-sine 11 ms Duration (w/ SSD, w/o add-on card, according
to IEC60068-2-27)
EMC CE/FCC Class A, according to EN 55022 & EN 55024
* Full-loading power consumption is measured with 2GB DDR3 memory and one 2.5” SATA HDD installed under the
following conditions:
- 100% loading for Atom E3845 CPU
- 100% loading for 3D graphics
- 100% loading for GbE port
** The 100% CPU loading is applied using Passmark® BurnInTest™ v7.0. For detail testing criteria, please contact
Neousys Technology
*** For sub-zero operating temperature, wide-temperature DDR3-L and wide-temperature HDD/SSD are required.
To Next Page
Loading...
