POC-200 Series User’s Manual
Copyright © 2014 Neousys Technology Inc. All Right Reserved. Page 19 of 78
2.2.7 IEEE 802.3at PoE PSE (POC-200 Only)
PoE, or Power over Ethernet, is a technology to supply electrical power along with data on
a standard CAT-5/CAT-6 Ethernet cable. Two Gigabit Ethernet ports on POC-200 support
IEEE 802.3at PoE PSE (Power Sourcing Equipment) function. Each PoE port can deliver
25.5 W of power to a PoE PD (Powered Device), such as a PoE IP camera or a PoE WIFI
AP. PoE defines a mechanism to automatically detect the device connected and determine
whether to dispatch power. This makes PoE port 100% compatible with traditional Ethernet
devices thus you can use these ports to connect PoE or non-PoE devices.
2.2.8 DVI-I Connector
POC-200 series features a DVI-I connector on its front panel to output both VGA and
DVI/HDMI signals. The DVI/HDMI and VGA outputs are directly driven by integrated Intel
HD Graphics engine and support up to 2560 x 1600 resolution.
To Next Page
Loading...
