POC-200 Series User’s Manual
Copyright © 2014 Neousys Technology Inc. All Right Reserved. Page 24 of 78
2.3 Back Panel I/O Functions
To fit more general application requirements, POC-200 series offers more I/O functions on
i
t
s
b
a
ck panel. In this section, we’ll illustrate each I/O function on the back panel.
2.3.1 USB3.0 Connectors
There are totally three USB 3.0 ports and one USB 2.0 port on POC-200 series. One of
three USB 3.0 ports is located on the back panel. This USB 3.0 port is implemented via
native xHCI controller inside Bay Trail SoC. By BIOS default, this USB port is operated in
xHCI (eXtensible Host Control Interface) mode and is compatible to USB 3.0, USB 2.0,
USB 1.1 and USB 1.0 devices.
To utilize USB 3.0 function in Windows, you need to install corresponding USB3 driver for
Bay Trail SoC. Please refer to section 4.3 for information of driver installation.
To Next Page
Loading...
