POC-200 Series User’s Manual
Copyright © 2014 Neousys Technology Inc. All Right Reserved. Page 29 of 78
2.4 Internal I/O Functions
2.4.1 Remote On/Off Control
The remote on/off control function allows users to turn on or turn off the system remotely by
connecting an external switch. This function is provided via a 1x3 pins, 2.0mm pitch pin
header.
Both AT-mode and ATX-mode on/off control are supported. For detail information of using
remote on/off control function, please refer to section 3.7.2/3.7.3.
Switch Connection for AT/ATX Mode Remote On/Off Control
Mode Jumper Setting
AT
ATX
To Next Page
Loading...
