POC-200 Series User’s Manual
Copyright © 2014 Neousys Technology Inc. All Right Reserved. Page 20 of 78
For VGA monitor, Neousys offers a specialized DVI-to-VGA adapter as an accessory
sh
i
p
p
e
d with POC-200 series. This adapter supports VGA DDC signals and thus eliminates
compatibility issues with VGA monitors. Or you can use a DVI-I to VGA+DVI-D Y-cable to
support two independent display outputs.
DVI-to-VGA Adapter DVI-I to VGA+DVI-D Y-Cable
To have best graphics performance in Windows, you need to install corresponding graphics
driver. Please refer to section 4.3 for information of driver installation.
2.2.9 DIO Connector
2.2.9.1 Isolated DIO on POC-200
POC-200 integrates 2500Vrms isolated DIO function for extending application range. This
feature provides 4 channels of isolated digital input and 4 channels of isolated digital output
via a 16-pin box-header connector. The following table describes the pin definition of
isolated DIO connector.
To Next Page
Loading...
