Neousys Technology POC-200 - Specification of POC-212

POC-200 Series User’s Manual
Copyright © 2014 Neousys Technology Inc. All Right Reserved. Page 10 of 78
Input Connector 2-pin pluggable terminal block for DC input
Power Consumption
Typical: 7.68W (0.32A@24V)
Full-loading: 13.44W (0.56A@24V)*
Mechanical
Dimension 149mm (W) x 105 mm (H) x 58 mm (D)
Weight 1.1 kg (with one 2.5” SATA HDD)
Mounting Wall-mount (Standard)
DIN-rail mount (Optional)
Environmental
Operating
Temperature
-30°C ~ 70°C with SSD, 100% CPU loading **/***
-10°C ~ 60°C with HDD, 100% CPU loading **/***
Storage
Temperature
-40°C ~85°C
Humidity 10%~90% , non-condensing
Vibration Operating, 5 Grms, 5-500 Hz, 3 Axes (w/ SSD, w/o add-on card, according to
Shock
Operating, 50 Grms, Half-sine 11 ms Duration (w/ SSD, w/o add-on card, according
to IEC60068-2-27)
EMC CE/FCC Class A, according to EN 55022 & EN 55024
* Full-loading power consumption is measured with 2GB DDR3 memory and one 2.5” SATA HDD installed under the
following conditions:
- 100% loading for Atom E3845 CPU
- 100% loading for 3D graphics
- 100% loading for GbE port
** The 100% CPU loading is applied using Passmark® BurnInTest™ v7.0. For detail testing criteria, please contact
Neousys Technology
*** For sub-zero operating temperature, wide-temperature DDR3-L and wide-temperature HDD/SSD are required.
1.2.3 Specification of POC-212
System Core
Processor Intel® Atom™ E3845 1.91 GHz quad-core processor
Graphics Integrated Intel® HD Graphics
Memory 1x SODIMM socket for DDR3L-1333, up to 8GB
Panel I/O Interface
Ethernet 2x Gigabit Ethernet ports by Intel® I210 GbE controller
PoE
N/A
Video Port
1x DVI-I connector for both analog RGB and DVI/HDMI outputs, supporting up to
2560 x 1600 resolution
Serial Port
1x software-programmable RS-232/422/485 (COM1)
1x RS-232 (COM2)