Neousys Technology POC-200 - Specification of POC-210

POC-200 Series User’s Manual
Copyright © 2014 Neousys Technology Inc. All Right Reserved. Page 9 of 78
Storage
T
e
m
p
e
rature
-40°C ~85°C
Humidity 10%~90% , non-condensing
Vibration Operating, 5 Grms, 5-500 Hz, 3 Axes (w/ SSD, w/o add-on card, according to
Shock
Operating, 50 Grms, Half-sine 11 ms Duration (w/ SSD, w/o add-on card, according
to IEC60068-2-27)
EMC CE/FCC Class A, according to EN 55022 & EN 55024
* Full-loading power consumption is measured with 2GB DDR3 memory and one 2.5” SATA HDD installed under the
following conditions:
- 100% loading for Atom E3845 CPU
- 100% loading for 3D graphics
- 100% loading for GbE port
** The 100% CPU loading is applied using Passmark® BurnInTest™ v7.0. For detail testing criteria, please contact
Neousys Technology
*** For sub-zero operating temperature, wide-temperature DDR3-L and wide-temperature HDD/SSD are required.
1.2.2 Specification of POC-210
System Core
Processor Intel® Atom™ E3845 1.91 GHz quad-core processor
Graphics Integrated Intel® HD Graphics
Memory 1x SODIMM socket for DDR3L-1333, up to 8GB
Panel I/O Interface
Ethernet 2x Gigabit Ethernet ports by Intel® I210 GbE controller
PoE
N/A
Video Port
1x DVI-I connector for both analog RGB and DVI/HDMI outputs, supporting up to
2560 x 1600 resolution
Serial Port
2x software-programmable RS-232/422/485 (COM1 & COM3)
2x RS-232 (COM2 & COM4)
USB
1x USB 3.0 port via native USB3 controller
2x USB 3.0 ports via Renasas uPD720202 USB3 host controller
1x USB 2.0 port
Audio 1x Speaker-out
DIO 4-CH 5V TTL DI + 4-CH 5V TTL DO
Internal I/O Interface
Mini-PCIe 1x mini PCI Express slot with USIM socket
Storage Interface
SATA HDD 1x internal SATA port for 2.5” HDD/SSD
Power Supply
DC Input Built-in 8~35 VDC DC input