Copyright © Neoway Technology Co., Ltd
If the module works in temperature exceeding the thresholds, its RF performance (e.g. frequency
deviation or phase deviation) might be worse but it can still work properly.
4.3 Current
Table 4-3 Current feature
Testing Result
(Average Current)
3.9 V Agilent power supply
Set the instrument and power on the module.
Power on the module or use AT command to shut
the module down.
Average network
searching current
Set the instrument.
Start the module. Wait until the module registers the
instrument.
On a live network, the module registers the network
and then enters the sleep mode.
Set the instrument properly (DRX=9)
Maximum power level in full rate
mode
To Next Page
Loading...
