Reel
6.3.2 Humidity-Sensitive
N11 is a level 3 moisture-sensitive electronic elements, in compliance with IPC/JEDEC J-STD-020
standard.
If the module is exposed to air for more than 48 hours at conditions not worse than 30°C/60% RH,
bake it at a temperature higher than 90 degree for more than 12 hours before SMT.Or, if the
indication card shows humidity greater than 20%, the baking procedure is also required.Do not bake
modules with the package tray directly.
6.4 Storage
N11 should be stored in the following conditions:
⚫
Temperature: 20°C to 26°C
⚫
Humility: 40% to 60%
⚫
Period: 120 days
To Next Page
Loading...
