Error Unresolved
We are sorry this troubleshooting did not resolve your Trident Error.
Error Condition
Test A Fail
Explanation of Error
Test A Fail
The “Test A Fail” error indicates there is an error in the titration associated with reagent A.
Recommended Course of Action
Test A Fail
This most often occurs because there is no reagent in the reagent bottle, but there is still reagent level
according to the Trident tile and Apex.
To resolve this, run the reagent A replacement task in Apex Fusion or see the guide to manually replace
reagents.
After replacing the reagent, reboot the Trident or unplug the 1LINK cable to the Trident.
Error Condition
Test B Fail
Explanation of Error
Test B Fail
The “Test B Fail” error indicates there is an error in the titration associated with reagent B.
Recommended Course of Action
Test B Fail
This most often occurs because there is no reagent in the reagent bottle, but there is still reagent level
according to the Trident tile and Apex.
To resolve this, run the reagent B replacement task in Apex Fusion or see the guide to manually replace
reagents.
To Next Page
Loading...
Need help?
General