AP4.8 Connection and setting
AP4-10
Procedure
2. Select [Network Setup], followed by [Enter].
3. Select Network, followed by [Enter].
10. Press [Esc]. The updating starts automatically.
4. Settings on PC
For example)
- IP address : 172.31.16.2
- Subnet mask : 255.255.0.0
“Ping command”. See page AP4-32.
1. Press [F8][2] to open "Sy stem Setup" menu.
4. Select "I P Address", followed by [Enter].
5. Set "I P address", followed by [Enter].
6. Select "Subnet Mask", followed by [Enter].
9. Select "Yes", follow ed by [Enter] to update the setting. The message "Press ES C
7. Set "Subnet Mask", followed by [Enter].
8. Press [Esc] to show "Update".
key to Restart Nera C". appears.
After setting, check the connection between Nera C and PC by using
Perform network settings on the PC. For details refer to the PC's owner's manual.
To Next Page
Loading...