Nera Inmarsat-c - Page 175

AP4.8 Connection and setting
AP4-13
8. Press [Esc].
Note)
When the router supports DHCP and IP address is assigned automatically, set DHCP
Settings on PC
Make network settings on the PC. For details refer to the PCs owners manual.
- IP address : 172.31.x.x
Note 1)
- Subnet mask : 255.255.0.0
Note 1)
cept for
accordingly.
Note 2)
When the router supports DHCP and IP address is assigned automatically, set TCP/IP
setting on the PC to  Obtain an IP address automatically .
“Ping” command. See page AP4-32.
in [Network] menu on Nera C to ON.
After setting, check the connection between Nera C and PC by using
IP address assigned to the PC is from "172.31. 0.1" to "172.31.255.254" ex
If the Nera C is connected to other network, the network address is changed
"172.31.16.1".
5. Set "g ateway IP address", followed by [Enter].
7. Select "Yes", followed by [Enter].
6. Press [Esc] to show "Update".