Ness D16 Owner's Manual

NESS D16 CONTROL PANEL - USER MANUAL
11
MONITOR MODE
Monitor mode allows you to Arm selected
zones while others are ignored. Typically,
perimeter zones (doors and windows) can be
monitored while you are at home.
Your installer must program which zones will
be active in Monitor mode.
The panel must be fully Disarmed before
Arming in Monitor Mode.
2. Press
[User Code]
...or
(If Monitor Shortcut has been enabled by your installer)
...or by RADIO KEY, press the OFF button twice
(If Radio Key Monitor Arming has been enabled by your installer)
3. The MONITOR light will turn on
• Only the zones which have been programmed by your
installer to be Monitor Zones will be Armed.
MONITOR MODE
If an alarm occurs while in Monitor mode,
entering
[User Code]
will silence the
alarm. This will also Disarm the panel, so
remember to enter monitor again if needed.
By using the optional Radio Keys you can
enter Monitor Mode by pressing the OFF
button twice within 4 seconds. (Your installer
must enable Radio Key Monitor Arming for
this to work).
Technical Manuals Online! - http://www.tech-man.com

Ness D16 Specifications

General

Brand	Ness
Model	D16
Category	Control Panel
Language	English