Ness D16 Owner's Manual

NESS D16 CONTROL PANEL - USER MANUAL
14
ALARM MEMORY
1. Press
[User Code]
...or
(If View Memory Shortcut has been enabled by your installer)
2. Press (The next most recent event will be displayed)
Press (The next most recent event will be displayed)
Press .....and so on (Up to 30 events)
3. Press to exit Memory Mode
4. (The MEMORY light will stop flashing)
VIEW ALARM MEMORY
The D16 Control Panel stores a
comprehensive Alarm Memory. The D16 will
remember Arming, Disarming, Low Battery,
Mains Fail and Alarms.
The memory is constantly upgraded and the
last 30 events are always available for
viewing.
This Memory display can only be selected
while the panel is in the Disarmed state.
TO CLEAR THE MEMORY LIGHT
The MEMORY light flashes continuously
when an alarm has occurred as a reminder
to view the alarm memory.
The MEMORY light stops flashing after the
memory is viewed as shown above.
The MEMORY light is automatically
cleared next time the panel is Armed.
MEMORY MODE - EVENTS INDICATED BY KEYPAD LIGHTS:
LIGHT ALARM EVENT
Zone lights 1-16 Zone alarm
ARM Panel Armed
(no lights) Panel Disarmed
TAMPER Tamper alarm (Siren cover, panel etc)
EXCLUDE Panic alarm
BATTERY Low Battery
MAINS Mains power failure
RADIO, BATTERY, ZONE Radio Device battery low
RADIO, BATTERY, ARM Radio Key battery low
Technical Manuals Online! - http://www.tech-man.com

Ness D16 Specifications

General

Brand	Ness
Model	D16
Category	Control Panel
Language	English