NESS D16 CONTROL PANEL - USER MANUAL
21
REMOTE OPERATION
EXAMPLE: ARMING THE D16 BY TELEPHONE
1. Dial D16 telephone number. Listen for 1 double ring then hang up.
2. Wait 10 seconds, then dial the D16 telephone number again.
3. The D16 answers immediately and gives a 2 second beep followed by low tone.
4. PRESS
To prepare the D16 ( 3 beeps)
5. PRESS [User Code]
to authorise the next command ( 3 beeps)
6. PRESS
to Arm the panel ( 3 beeps)
7. PRESS
to finish and hang up
SUMMARY OF TELEPHONE COMMANDS
Prepare to receive commands
Arm Areas
Disarm Areas
Turn Aux 1 Output ON or OFF
Turn Aux 2 Output ON or OFF
Finished - hang up
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
