56
4. then click “OK” …….
Setting the System Clock
The System Clock is automatically adjusted according to the system BIOS. If the
system crashes or becomes faulty then it would be necessary to change the
system clock. After the changes are made click “Apply”, then “OK”
Figure 7-5: System Clock Settings
Other Settings
Recycle Recording
This field gives users three options. The first one “Recycle Rec” applies to
freeing up space or deleting some space during the recording process. When the
hard disk drive is full an alarm will be triggered indicating that the system disk is
full. However, if the system has “Recycle Rec” enabled the system will continue
to record over old video data, thus replacing previously recorded data.
1. Click the “System” Tab
2. Under “Others” click the checkbox next to “Recycle Rec”
Figure 7-6: Recycle Rec
3. Click “Apply”, then “OK” to activate the changes.
Auto Login
A second option is to give the administrator and other users “Auto Login” status
when the system is started. Users with this status do not have to enter a
username and password every time they log in.
1. Click the “System” Tab.
2. Under “Others” click the checkbox next to “Auto Login”.
To Next Page
Loading...
