UX2000 SBC XO SIP Trunk Lync Server 2010 Configuration Guide
27
Figure 22 Call Routing Table
6.3 Translation Tables
Translation tables are used to modify the called and calling party information elements among other
elements that are pertinent to proper call handling between the origination and destination servers. The
basic translations rely on the use of Regular Expressions as the numbers/names are changed from what is
received to what is sent to the destination. Translation tables must have a matching entry format in order
for the call to be routed to that route. If there are no matching Translation table entries the call will be
returned back to the Routing table so the next Route entry can be tried for a match. This will happen as
long as there are Routes in the Route table to try. If all Routes have been tried with no matches in the
Translation table(s) the call will fail.
To Next Page
Loading...