NET UX2000 SBC - Add Translation Table for ATA

UX2000 SBC XO SIP Trunk Lync Server 2010 Configuration Guide
47
Figure 45 Route Table Ordering for calls to ATA
9.2.5 Add Translation Table for ATA
All Calls from the ATA will have to be routed to Lync Server 2010. A Translation table may be required to
match the default number format on the Lync Server 2010 (E.164). The Translation table below is used to
add a ‘+’ to the called number from the ATA:
Figure 46 Translation Table to Add + to Called Number