NET UX2000 SBC - 5 LYNC SERVER 2010 CONFIGURATION; 5.1 Adding UX2000 SBC to Lync Server Topology; 5.2 Adding the UX2000 into Lync Server Routing; 5.3 Configuring Assigned DIDs to Lync Users

UX2000 SBC XO SIP Trunk Lync Server 2010 Configuration Guide
3
5 LYNC SERVER 2010 CONFIGURATION 19
5.1 Adding UX2000 SBC to Lync Server Topology 19
5.2 Adding the UX2000 into Lync Server Routing 21
5.3 Configuring Assigned DIDs to Lync Users 23
5.4 Creating Analog Contacts with XO SIP Trunk DIDs 24
6 UX2000 TELEPHONY ROUTING PROCESS 25
6.1 Signaling Groups 26
6.2 Call Routing Table 26
6.3 Translation Tables 27
7 MEDIA CONFIGURATION 30
8 ENABLING MEDIA TRANSCODING 32
9 ANALOG SUPPORT 33
9.1 Differences Between PSTN and Analog Call Routing 34
9.2 Analog Configuration 39
9.2.1 SIP Server Table 39
9.2.2 Analog Translation Table 41
9.2.3 Signaling Group 43
9.2.4 Modify Lync Server 2010 Routing Table to Add ATA Route 45
9.2.5 Add Translation Table for ATA 47
9.2.6 Add Route Table for ATA 48
10 TROUBLESHOOTING 50
10.1 Visual Analysis 50
10.1.1 Current SG Status and Call Activity 50
10.1.2 Current Alarms 51
10.2 Viewing Debug Logs 51
10.3 Sending Debug Logs to a Syslog Collector 51
Figure 1 Typical Lync Server 2010 to XO SIP Trunk Deployment .................................................................... 7