Transition Networks Contra Converter Quick Setup Guide
Command: CES Link Setup Name
Syntax: CES link setup name <link> [<name>]
Description: Set or delete the name associated with a logical link, where:
<link>: Logical Link number (1 to 128, may be less on some products).
<name>: Logical Link Name.
Example: Name Link 1 “FirstLL”:
>ces link setup name 1 FirstLL
CES LINK 1 CONFIGURATION
========================
Name : FirstLL
Direction : Disabled
Frames Per Packet : 1
Remote Packet Address : 0.0.0.0
2nd Remote Packet Address : 0.0.0.0
Remote Logical Link : 1
Jitter Buffer Length : 1 ms
Jitter Packets : 8
QOS Type : Diffserv
QOS Value : 0 (0x00)
Diffserv Codepoint : 0
VLAN Tagging : Disabled
VLAN Tagging ID : 0
VLAN Tagging Priority : 0
>
33604 Rev. A www.transition.com Page 47 of 72
To Next Page
Loading...