Transition Networks Contra Converter Quick Setup Guide
Command: Nudge CES Link Jitter
Syntax: ces link jitter nudge <link> <packets>
Description: Manually nudge a logical link jitter buffer to increase or decrease latency, where:
<link> : Logical Link number (1 to 128, may be less on some products).
<packets>: How many packets to nudge by (-128 to 128).
Note: Jitter Nudge must be between -128 and 128 (inclusive).
Example: Manually nudge logical link 1 jitter buffer to increase latency and decrease latency on
logical link 2:
>ces link jitter nudge 1 100
Logical Link 1 Jitter Buffer Nudged by 100 Packets
>ces link jitter nudge2 -50
Invalid command
>ces link jitter nudge 2 -50
Logical Link 2 Jitter Buffer Nudged by -50 Packets
Command: Reset CES Link Jitter Buffer Stats
Syntax: ces link jitter reset <link>
Description: Resets the logical link jitter buffer statistics, where:
<link>: Logical Link number (1 to 128, may be less on some products).
Example: Reset the logical link jitter buffer statistics for logical links 1, 2, and 3:
>ces link jitter reset 1
Reset Logical Link 1 Jitter Buffer Statistics
>ces link jitter reset 2
Reset Logical Link 2 Jitter Buffer Statistics
>ces link jitter reset 3
Reset Logical Link 3 Jitter Buffer Statistics
>ces link jitter reset 99
Invalid <link> parameter: 99
Syntax:
CES link jitter reset <link>
>
33604 Rev. A www.transition.com Page 53 of 72
To Next Page
Loading...