Transition Networks Contra Converter Quick Setup Guide
Command: Set Up CES Link Jitter Adjustment Schedule
Syntax: ces link setup jitter
<link> [<adjustafter>] [none|alwayson|schedule|onceonly]
[<mon_start>] [<mon_stop>] [<tue_start>] [<tue_stop>] [<wed_start>] [<wed_stop>]
[<thu_start>] [<thu_stop>] [<fri_start>] [<fri_stop>] [<sat_start>] [<sat_stop>] [<sun_start>]
[<sun_stop>]
Description: Update the automatic jitter buffer adjustment configuration for a logical link, where:
<link> : Logical Link number (1 to 128, may be less on some products).
<adjustafter> : Time to wait before doing automatic jitter buffer adjustment (3 - 999 minutes).
none|alwayson|schedule|onceonly: When to do automatic jitter buffer adjustment.
<mon_start> : Jitter Schedule Monday Start Time.
<mon_stop> : Jitter Schedule Monday Stop Time.
<tue_start> : Jitter Schedule Tuesday Start Time.
<tue_stop> : Jittere Schedule Tuesday Stop Time.
<wed_start> : Jitter Schedule Wednesday Start Time.
<wed_stop> : Jitter Schedule Wednesday Stop Time.
<thu_start> : Jitter Schedule Thursday Start Time.
<thu_stop> : Jitter Schedule Thursday Stop Time.
<fri_start> : Jitter Schedule Friday Start Time.
<fri_stop> : Jitter Schedule Friday Stop Time.
<sat_start> : Jitter Schedule Saturday Start Time.
<sat_stop> : Jitter Schedule Saturday Stop Time.
<sun_start> : Jitter Schedule Sunday Start Time.
<sun_stop> : Jitter Schedule Sunday Stop Time.
Note: The Schedule stop time must be later than the start time.
The Schedule time must be in HHMM format, between 0000 and 2359.
Example: Set the automatic jitter buffer adjustment for logical link 1:
>ces link setup jitter 1 45 1100 1200
CES Logical Link 1: Jitter Adjustment
======================================
Jitter Adjustment Enabled
>
33604 Rev. A www.transition.com Page 52 of 72
To Next Page
Loading...