Transition Networks Contra Converter Quick Setup Guide
Command: Set Up CES Link Active Schedule
Syntax: ces link setup schedule
<link> [enable|disable] [<mon_start>] [<mon_stop>] [<tue_start>]
[<tue_stop>] [<wed_start>] [<wed_stop>] [<thu_start>] [<thu_stop>] [<fri_start>] [<fri_stop>]
[<sat_start>] [<sat_stop>] [<sun_start>] [<sun_stop>]
Description: Update the schedule of when a logical link will be active, where:
<link> : Logical Link number (1 to 128, may be less on some products).
enable|disable: Whether scheduling is enable or disabled.
<mon_start> : Schedule Monday Start Time.
<mon_stop> : Schedule Monday Stop Time.
<tue_start> : Schedule Tuesday Start Time.
<tue_stop> : Schedule Tuesday Stop Time.
<wed_start> : Schedule Wednesday Start Time.
<wed_stop> : Schedule Wednesday Stop Time.
<thu_start> : Schedule Thursday Start Time.
<thu_stop> : Schedule Thursday Stop Time.
<fri_start> : Schedule Friday Start Time.
<fri_stop> : Schedule Friday Stop Time.
<sat_start> : Schedule Saturday Start Time.
<sat_stop> : Schedule Saturday Stop Time.
<sun_start> : Schedule Sunday Start Time.
<sun_stop> : Schedule Sunday Stop Time.
Note: Schedule times must be in HHMM format, between 0000 and 2359.
The Schedule stop time must be later than the start time.
Example: Schedule logical link 1 to be active Mondays from 11:00 to 12:00 AM:
>ces link setup schedule 1 enable 1100 1200
CES Logical Link 1 Schedule
===========================
Schedule: Enabled
Monday Start: 11:00
Monday Stop: 12:00
Tuesday Start: 00:00
Tuesday Stop: 00:00
Wednesday Start: 00:00
Wednesday Stop: 00:00
Thursday Start: 00:00
Thursday Stop: 00:00
Friday Start: 00:00
Friday Stop: 00:00
Saturday Start: 00:00
Saturday Stop: 00:00
Sunday Start: 00:00
Sunday Stop: 00:00
>
33604 Rev. A www.transition.com Page 51 of 72
To Next Page
Loading...