EasyManua.ls Logo

Net2Edge PB-TDM1-CONTRA - Page 57

Default Icon
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Transition Networks Contra Converter Quick Setup Guide
Command: Configure CES LAN Multicast Setup
Syntax: ces lan multicast setup [<multicast_group>]
Description: Display or update the multicast group configuration. Defines an optional multicast
group to join. The Multicast Group Address must be in the range 224.0.0.0 to
239.255.255.255 (use 0.0.0.0 to delete). IPV6 is not currently supported.
The parameters are:
<multicast_group>: Multicast group to join.
Example: Define an optional multicast group to join.
>ces lan multicast setup 230.10.20.100
CES Multicast Group Configuration
=================================
Multicast Group Address : 230.10.20.100
>
Command: Delete a CES LAN Multicast Group
Syntax: ces lan multicast del
Description: Clear an existing multicast group configuration.
Example: Delete an existing multicast group configuration.
>ces lan multicast del
CES Multicast Group Configuration
=================================
Multicast Group Address : Disabled
>
>ces lan multicast del 1
Invalid parameter: 1
Syntax:
CES lan multicast del
>
33604 Rev. A www.transition.com Page 57 of 72