Transition Networks Contra Converter Quick Setup Guide
Command: CES Event Report
Syntax: ces event report [<threshold>] [<interval>] [<early>] [<late>] [<underrun>] [<dco>]
Description: Show or update the CES event reporting configuration, where:
<threshold>: Event Reporting Threshold ( 0 - 5).
<interval> : Reporting Interval ( 1 - 1440) in minutes (60 = 1 hour, 1440 = 1 day).
<early> : Early Packet Threshold ( 0 = Disabled).
<late> : Late Packet Threshold ( 0 = Disabled).
<underrun> : Underrun Threshold ( 0 = Disabled).
<dco> : DCO Threshold ( 0 = Disabled).
Example 1: Show the current CES event reporting configuration:
>ces event report
CES Event Reporting
===================
Event Reporting Threshold: 2
Event Reporting Interval: 60 mins
Early Packets Threshold: 0
Late Packets Threshold: 0
Underrrun Threshold: 0
DCO Threshold: 0
>
Example 2: Update the various CES event reporting parameters:
>ces event report threshold 4
WARNING
=======
Event Threshold must be between 1 and 5 (inclusive).
Entered value not saved.
CES Event Reporting
===================
Event Reporting Threshold: 2
Event Reporting Interval: 4 mins
Early Packets Threshold: 0
Late Packets Threshold: 0
Underrrun Threshold: 0
DCO Threshold: 0
>ces event report interval 60
WARNING
=======
Event Threshold must be between 1 and 5 (inclusive).
Entered value not saved.
CES Event Reporting
===================
Event Reporting Threshold: 2
33604 Rev. A www.transition.com Page 64 of 72
To Next Page
Loading...