Netafim Orbia GrowSphere MAX User Manual

Rev 01
|
GrowSphere MAX User Manual
91
|
Controller Operation
GrowSphere
Operating System
General Program Settings
Perform the following steps to define the irrigation program's general settings:
1. Select the type
Enables defining the irrigation
program type.
2. Select the priority
Enables designating the
irrigation program's order in
the queue. A High priority
program is placed higher up
in the queue and will thus
execute before a Normal
priority program.
3. Select the unit
Enables defining the measurement
unit. Options include: mm
(millimeter), m3 (cubic meter), and
time (HH:MM or MM:SS).
Amount
Displays amount of water
used per irrigation shift.
Total
Displays total amount
of water to be irrigated
and total irrigation time.
4. Set the water
budget factor
See Setting Water
Budget Factor
5. Assign shifts
See Assigning
Irrigation Program
Shifts
6. Link a dosing
recipe
See Selecting Dosing
Last/Next Irrigation
Displays the day/time
when the last irrigation
ended and when the
next irrigation will start.
SAFETY
QUICK START
INTRODUCTION
INSTALL ATION
CONTROLLER
OPERATION
CONTROLLER
CONFIGURATION

Netafim Orbia GrowSphere MAX Specifications

General

Brand	Netafim
Model	Orbia GrowSphere MAX
Category	Controller
Language	English