2. If you plan to use the 25-GbE link speed for the 10/25 GbE ports, select 25GbE from the Link
speed drop-down list.
The network switches you are using for the Grid Network and the Client Network must also
support and be configured for this speed. SFP28 transceivers must be installed in the ports.
3. Enable or disable the StorageGRID networks you plan to use.
The Grid Network is required. You cannot disable this network.
a. If the appliance is not connected to the Admin Network, unselect the Enable network
check box for the Admin Network.
b. If the appliance is connected to the Client Network, select the Enable network check box
for the Client Network.
Hardware Installation and Maintenance Guide for SG5700 Appliances 36
Configuring the hardware
To Next Page
Loading...
Need help?
General
