Netech EXPMT 2000 - Equipment ID

EXPMT 2000 User Manual/R5
|
11
Equipment ID
In this menu the user can input an 8-digit Equipment
ID
of the
unit
under test (DUT). The test results that are saved will be
designated -
ed under this unique
ID
and available for uploading to
a
PC
and printing. Therefore, it is very important to change the
ID
when a new unit is being
tested .
To change or enter a new Equipment
ID ,
press F1 from the
main
menu. The Equipment
ID
menu will appear as shown
below .
7.
Use F1, F2, F3,
F4
t o
set the first 4 digits (D1, D2, D3, D4)
And “>” for the next 4 digits
(D5, D6, D7,
D8)
8.
When
done press the
“SAVE”
key.
9. The Equipment ID is now saved and will be displayed in
the main menu.