34
EXPMT 2000 User Manual/R5
Uploading Test Results to PC
Once the Procom Print software installation is completed,
follow the procedure to upload the test results to the PC.
• Connect the EXPMT 2000 to the PC using the RS232
or
(RS232/USB)
cable.
• Turn the
EXPMT
2000 Power ON.
• A message “STM32 Boot loader” will appear on the screen
confirming that a communication
is established between
the
PC
and the
EXPMT
2000.
• The installation of the software is now complete and ready
for uploading the test
results
.
ProComPrint Software Features
Following are some of the main features of the
softwar
e.
•
Standar
d
Pull
Down
Menu
(File,
E
dit,
P
or
t,
Help,
Options)
.
Only
the relevant menus are enabled in the basic Procom Print
Version 1.0.
In addition to pull down menu there are six individual
selections
as highlighted in the
Screen
Shot
below
.
To Next Page
Loading...
