30
EXPMT 2000 User Manual/R5
Save and Print Test Results
Introduction
As mentioned
earlier
,
test results can be stored into the
memor
y
under
the user specific “ID” and available to be uploaded
t
o
a
PC
using the
serial to
USB
cable.
Saving Test Results
When
the test results are displayed in any of the test
functions,
press
“Save”
key.
The results will be saved under the Equipment ID set earlier
in
the non-volatile internal memory. However, when the
memor
y
is full it will flash
an error message, indicating that
no
more
records can be saved.
The test results saved are ready to be uploaded to a PC
using
the Procom Print software supplied with unit. The Procom Print
is compatible with Windows 7 and Windows 10.
ProComPrint Software Setup
Procom Print included in the CD is a basic version of the
Procom Print software for quickly configuring
a
HyperTerminal
communication protocol and uploading of the test data to a
word format file for printing and saving the test results to a file
in the PC.
Note: The advanced Procom Print is a database version a n d
customizable to meet individual
r
equir
ements
.
To Next Page
Loading...
