EXPMT 2000 User Manual/R5
31
• To setup the software follow the instructions
below
.
• Insert the ProComPrint Software
CD
in the PC.
• Double click on the
Setup
.
Ex
e
• The following welcome screen will appear.
• Click Next.
The “Select Application Folder” screen appears as shown
below
.
The destination folder to which the results are to be saved need
t
o
be set. The default folder is set to C:\Program
Files\x86\Procom
Print. To change the folder, click, on “Browse” and set the folder
in
the desired
direct
or
y.
To Next Page
Loading...
