Netech EXPMT 2000 - Atrial Pacer Refractory Test; Atrial Sense Refractory Test

22
|
EXPMT 2000 User Manual/R5
Atrial Pacer Refractory Test
1. From the Atrial measurement menu select “Refr” (F1) for
the
pace and sense refractory selection menu as shown
below .
2. Press F1 “Pace” to begin the pace refractory t
est .
3. The display will flash
“
???” during computation o f t h e
refractory period. Once the refractory period is determined
the
“???” flashing will stop and the refractory period and
pulse rate will be displayed.
4. To repeat the test press F1 gain.
5. To save the test result press “Save”.
Atrial Sense Refractory Test
1. From the refractory
menu,
select “Sens” (F4).
2. The sense refractory per i od and the pulse rate will b e
displayed.