16
EXPMT 2000 User Manual/R5
Test Procedure
1. Press F1 in the Transcutaneous measurement menu
t
o
select “Refr” (refractory) test menu.
2. The following Refractory selection (Pace /Sense) Menu
will
be displayed.
3. Set the pacemaker in demand
mode
.
4. Select “Pace” (F1). The pace refractory and the pulse
r
ate
will be displayed after a few
seconds
.
5. The measurement c y c l e co n t i n ue s a n d the di s p l ay
i s
updated.
6. To interrupt the measurement press the
“ESC”
key.
7. To save the test result press save. The result will be saved
to the Equipment
ID
set earlier.
To Next Page
Loading...
