NETGEAR CM1000 User Manual

Manage and Monitor
22
High Speed Cable Modem
Change the Cable Connection Starting Frequency
The starting frequency for the cable connection is automatically generated. For most Internet
connections, you do not need to change this information.
WARNING:
Do not change the starting frequency unless your cable Internet
provider instructs you to do so. Changing the starting frequency
incorrectly causes serious connection and Internet problems.
 To change the starting frequency:
1. Launch a web browser from a computer that is attached with an Ethernet cable to the
cable modem or from a computer that is connected to a WiFi router that is attached with an
Ethernet cable t
o the cable modem.
2. Enter http://192.168.100.1.
A login window opens.
3. Enter the cable modem user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select Cable Connection.
5. In the Starting Frequency field, type a number as instructed by your cable Internet provider.
WARNING:
Do not change the starting frequency unless your cable Internet
provider instructs you to do so. Changing the starting frequency
incorrectly causes serious connection and Internet problems.

NETGEAR CM1000 Specifications

General

DOCSIS Version	3.1
Ethernet Ports	1 x Gigabit Ethernet
Channel Bonding	32x8
Device Type	Cable Modem
IPv6 Support	Yes
Compatibility	Xfinity, Spectrum, Cox
Weight	1.1 lbs
Max Download Speed	Up to 1 Gbps
Max Upload Speed	Up to 1 Gbps