NETGEAR GS308EP User Manual

2
Install and Access the Switch in Your
Network
This chapter describes how you can install and access the switch in your network.
The chapter contains the following sections:
• Set
up the switch in your network and power on the switch
• Methods to discover or access the switch
• Access the switch and discover the IP address of the switch
• Set up a fixed IP address for the switch
• Change the language of the device UI
• Change the switch password
• Register the switch
12

NETGEAR GS308EP Specifications

General

Model	GS308EP
Category	Switch
Ports	8
PoE Ports	8
Total PoE Budget	62W
Switching Capacity	16 Gbps
MAC Address Table Size	4K
Form Factor	Desktop
Jumbo Frame Support	Yes
VLAN Support	Yes
QoS	Yes
Energy Efficient Ethernet (EEE)	Yes
PoE Standards	IEEE 802.3af/at
Switch Type	Unmanaged
Forwarding Rate	11.9 Mpps
Operating Humidity	10% to 90% non-condensing
Operating Temperature	0 to 40°C
Power Supply	External Power Adapter