EasyManuals Logo

NETGEAR GS324TP User Manual

NETGEAR GS324TP
365 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #121 background imageLoading...
Page #121 background image
S350 Series 24-Port (PoE+) and 48-Port Gigabit Ethernet Smart Managed Pro Switches
Configure Switching User Manual121
6. In the LACP System Priority field, specify the switch’s link aggregation priority relative to
the devices at the other ends of the links on which link aggregation is enabled.
A higher value indicates a lower priority. You can change the setting globally by
specifying a priority from 1 to 65535. The default value is 32768.
7. Click the Apply button.
Y
our settings are saved.
Set the LACP Port Priority Settings
The LACP port configuration page is used to configure the LACP priority value for the selected
port and the administrative LACP time-out value.
To configure LACP port priority settings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Discover or Change the Switch IP
Address on page 12.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is
password.
The System Information page displays.
5. Select Switching> LAG >
Advanced > LACP Port Configuration.

Table of Contents

Other manuals for NETGEAR GS324TP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR GS324TP and is the answer not in the manual?

NETGEAR GS324TP Specifications

General IconGeneral
Switch typeManaged
Quality of Service (QoS) supportYes
Power connectorAC-in jack
SFP module slots quantity2
Installed SFP modules quantity-
Basic switching RJ-45 Ethernet ports quantity24
Number of VLANs256
Networking standardsIEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3at, IEEE 802.3az, IEEE 802.3x
Virtual LAN featuresPort-based VLAN, Private VLAN, Voice VLAN
MAC address table16000 entries
DHCP featuresDHCP client
Product colorBlack
Rack mountingNo
Number of fans2 fan(s)
Noise level32.8 dB
Input current5 A
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)229.9 W
Total Power over Ethernet (PoE) budget190 W
Operating temperature (T-T)0 - 45 °C
Cables includedAC
Weight and Dimensions IconWeight and Dimensions
Depth206 mm
Width330 mm
Height43 mm
Weight2690 g

Related product manuals