Need help?Do you have a question about the NETGEAR GS316EP and is the answer not in the manual?
General| Switch type | Managed |
|---|---|
| Quality of Service (QoS) support | Yes |
| Stackable | - |
| Certification | FCC 15 B CE/EN55032/24 VCCI ACMA CSA KC BSMI |
| Product color | Black |
| Rack mounting | No |
| Housing material | Metal |
| Power connector | DC-in jack |
| SFP module slots quantity | 1 |
| Installed SFP+ modules quantity | 0 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 16 |
| Mean time between failures (MTBF) | 784742 h |
| Number of VLANs | 64 |
| Networking standards | IEEE 802.1Q, IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
| Virtual LAN features | Port-based VLAN, Tagged VLAN |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Copper ethernet cabling technology | 10BASE-T, 100BASE-TX, 1000BASE-T |
| Sustainability certificates | CE |
| Jumbo frames | 10000 |
| MAC address table | 4096 entries |
| Packet buffer memory | 0.192 MB |
| Total Power over Ethernet (PoE) budget | 180 W |
| Power over Ethernet plus (PoE+) ports quantity | 15 |
| DHCP features | DHCP client |
| Queue scheduling algorithms | Weighted Round Robin (WRR) |
| Operating altitude | 0 - 3000 m |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Cables included | AC |
| Number of multicast groups filtered | 128 |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 102 mm |
|---|---|
| Width | 286 mm |
| Height | 27 mm |
| Weight | 880 g |
Lists the supported switch models for the manual.
Explains the meaning of LED indicators on the switch.
Provides essential safety guidelines for operating the switch.
Guides the physical setup and initial power-on process for the switch.
Explains how to find the switch's IP address to access its management interface.
Details the process of configuring a static IP address for persistent access.
Describes how to manage traffic priority and bandwidth using QoS settings.
Covers configuration options for specific switch ports, including speed and duplex.
Introduces Virtual LANs (VLANs) and their purpose in network segmentation.
Guides activating basic port-based VLANs and assigning ports to VLANs.
Explains advanced configurations for port-based VLANs, including multiple VLANs per port.
Details the creation and management of basic 802.1Q VLANs for network traffic control.
Explains how to manage the protocol used for discovering NETGEAR devices on the network.
Guides setting up multiple Ethernet ports as a single logical link for increased throughput.
Covers IGMP snooping for efficient multicast traffic forwarding, optimizing network performance.
Provides instructions for manually updating the switch's firmware.
Explains how to back up, restore, and manage switch configuration files.
Details the process of resetting the switch to its original factory default configuration.
Explains Power over Ethernet (PoE) features, capabilities, and management for powered devices.
Describes how to use the cable diagnostic feature to check network cable health.
Offers solutions for common Power over Ethernet (PoE) problems.
Lists the default configuration settings for the switch.
Provides detailed technical specifications for the GS316EP and GS316EPP models.
Explains how to discover and access the switch using an IP scanner application.
To Next Page
