1
Hardware
This user manual describes how you can use the device user interface (UI) to configure
and manage NETGEAR Gigabit Ethernet Plus Switches.
For a list of switch models that this manual supports, see Supported switch models on
page 8.
This chapter covers the following topics:
• Related documentation
• Switch package contents
• Supported switch models
• LEDs
• 1000BASE-X SFP slots
• Switch label
• Safety instructions and warnings
Note:
•
This user manual complements the installation guide that came with your switch.
You can also download the installation guide by visiting
netgear.com/support/download/.
•
For more information about the topics covered in this manual, visit the support
website at netgear.com/support
•
Firmware updates with new features and bug fixes are made available from time to
time at netgear.com/support/download/. You can manually check for, and download,
new firmware. If the features or behavior of your product do not match what is
described in this guide, see the latest firmware release notes for your switch model.
7
To Next Page
Loading...
