NETGEAR GS316EP User Manual

Configure HTTP access settings
You can choose to enable or disable web access to the switch's device UI through HTTP,
set the session timeout, and maximum number of HTTP sessions. HTTP is enabled by
default.
To configure the HTTP access settings:
1.
Open a web browser from a computer that is connected to the same network as the
switch, or connected directly to the switch through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
A login window opens.
3. Enter the device management password.
The password is the one that you specified the first time that you logged in. The
password is case-sensitive.
The HOME page displays.
4. Select SETTINGS > WEB ACCESS.
The HTTP Configuration page displays. Set one or more of the following options.
5. Click the Admin Mode button to enable or disable remote access via HTTP.
When this setting is enabled, the button displays on the right side of the slide, and
the slide turns green.
6.
In the HTTP Session Timeout (Minutes) field, type the number of minutes that a
session can be idle before the session times out.
The default is 60. The range is 0 to 60.
7.
In the Maximum Number of HTTP Sessions field, set the number of concurrent
sessions allowed.
You can set a number from 1 to 4. For example, if you manage your home office or
small business network yourself, you might set this to 1. The default is 4.
8. When your settings are complete, click the APPLY button.
Your settings are applied.
Browser security message with HTTPS access
After you enable HTTPS access and you attempt to access the device UI, your browser
might display a security message that your connection is not private or not secure, or
that a problem with the security certificate occurred. You can safely dismiss this message.
User Manual77Maintain and Monitor the Switch
Gigabit Ethernet Plus Switches

NETGEAR GS316EP Specifications

General

Switch type	Managed
Quality of Service (QoS) support	Yes
Stackable	-
Certification	FCC 15 B CE/EN55032/24 VCCI ACMA CSA KC BSMI
Product color	Black
Rack mounting	No
Housing material	Metal
Power connector	DC-in jack
SFP module slots quantity	1
Installed SFP+ modules quantity	0
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	16
Mean time between failures (MTBF)	784742 h
Number of VLANs	64
Networking standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Virtual LAN features	Port-based VLAN, Tagged VLAN
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Copper ethernet cabling technology	10BASE-T, 100BASE-TX, 1000BASE-T
Sustainability certificates	CE
Jumbo frames	10000
MAC address table	4096 entries
Packet buffer memory	0.192 MB
Total Power over Ethernet (PoE) budget	180 W
Power over Ethernet plus (PoE+) ports quantity	15
DHCP features	DHCP client
Queue scheduling algorithms	Weighted Round Robin (WRR)
Operating altitude	0 - 3000 m
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Cables included	AC
Number of multicast groups filtered	128
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	102 mm
Width	286 mm
Height	27 mm
Weight	880 g