NETGEAR GS316EP User Manual

To managed the uninterrupted PoE feature:
1.
Open a web browser from a computer that is connected to the same network as the
switch, or connected directly to the switch through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
A login window opens.
3. Enter the device management password.
The password is the one that you specified the first time that you logged in. The
password is case-sensitive.
The HOME page displays.
4. Select POE.
The Power over Ethernet (PoE) page displays.
5. Click the button to enable or disable Uninterrupted PoE.
Disabled: The button bar displays gray, and the button is positioned on the left.
Enabled: The button bar displays green, and the button is positioned on the right.
Power cycle the PoE ports
You can use the Power Cycle Ports feature to forcibly reset one or more PoE ports.
To power cycle PoE ports through the device UI:
1.
Open a web browser from a computer that is connected to the same network as the
switch, or connected directly to the switch through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
A login window opens.
3. Enter the device management password.
The password is the one that you specified the first time that you logged in. The
password is case-sensitive.
The HOME page displays.
4. Select POE.
The Power over Ethernet (PoE) page displays.
5.
In the Power Cycle Ports section, click the port number icon for every port that you
want to reset.
When a port is selected, the port number icon displays solid purple.
6. When all the ports that you want to power cycle are selected, click the APPLY button.
PoE on the selected ports is forcibly reset.
User Manual95Maintain and Monitor the Switch
Gigabit Ethernet Plus Switches

NETGEAR GS316EP Specifications

General

Switch type	Managed
Quality of Service (QoS) support	Yes
Stackable	-
Certification	FCC 15 B CE/EN55032/24 VCCI ACMA CSA KC BSMI
Product color	Black
Rack mounting	No
Housing material	Metal
Power connector	DC-in jack
SFP module slots quantity	1
Installed SFP+ modules quantity	0
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	16
Mean time between failures (MTBF)	784742 h
Number of VLANs	64
Networking standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Virtual LAN features	Port-based VLAN, Tagged VLAN
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Copper ethernet cabling technology	10BASE-T, 100BASE-TX, 1000BASE-T
Sustainability certificates	CE
Jumbo frames	10000
MAC address table	4096 entries
Packet buffer memory	0.192 MB
Total Power over Ethernet (PoE) budget	180 W
Power over Ethernet plus (PoE+) ports quantity	15
DHCP features	DHCP client
Queue scheduling algorithms	Weighted Round Robin (WRR)
Operating altitude	0 - 3000 m
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Cables included	AC
Number of multicast groups filtered	128
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	102 mm
Width	286 mm
Height	27 mm
Weight	880 g