S350 Series 24-Port (PoE+) and 48-Port Gigabit Ethernet Smart Managed Pro Switches
Configure System Information User Manual98
MED Details
Capabilities Supported The supported capabilities that were received in MED TLV from the device.
Current Capabilities The advertised capabilities that were received in MED TLV from the device.
Device Class The LLDP-MED endpoint device class. The possible device classes are as
follows:
• Endpoint Class 1 Indicates a generic endpoint class, of
fering basic LLDP
services.
• Endpoint Class 2 Indicates a media endpoint class, of
fering media
streaming capabilities as well as all Class 1 features.
• Endpoint Class 3 Indicates a communications device class, of
fering all
Class 1 and Class 2 features plus location, 91
1, Layer 2 switch support,
and device information management capabilities.
PoE Device Type The port PoE type. For example, Powered.
PoE Power Source The port’s power source.
PoE Power Priority The port’s power priority.
PoE Power Value The port’s power value.
Hardware Revision The hardware version advertised by the remote device.
Firmware Revision The firmware version advertised by the remote device.
Software Revision The software version advertised by the remote device.
Serial Number The serial number advertised by the remote device.
Model Name The model name advertised by the remote device.
Asset ID The asset ID advertised by the remote device.
Location Information
Civic The physical location, such as the street address, that the remote device
advertised in the location
TL
V, for example, 123 45th St. E. The field value
length range is 6–160 characters.
Coordinates The location map coordinates that the remote device advertised in the
location
TL
V, including latitude, longitude, and altitude.
ECS ELIN The Emergency Call Service (ECS) Emergency Location Identification
Number (ELIN) that the remote device advertised in the location TL
V. The
field range is 10–25.
Unknown
The unknown location information for the remote device.
Field Description