genie Advanced Home
44
N150 4-Port Wireless Router JNR1010
5. From the LAN port list, select the LAN port.
6. From the Priority list, select the priority for Internet access for this port’
s traffic relative to
other applications.
The options are Low, Normal, High, and Highest.
7. Click Apply to save this rule to the QoS Policy list and return to the QoS Setup screen.
8. In the QoS Setup screen, click Apply.
Set up QoS for a MAC Address
To create a QoS policy for traffic from a specific MAC address:
1. Select Advanced > Setup > QoS Setup, and click the Setup QoS Rule button.
The
QoS Setup screen displays.
2. Click Add Priority Rule.
3. From the Priority Category list, select MAC Address:
4. If the device is the MAC Device List, select its radio button.
The information from the MAC Device List populates the policy name, MAC Address, and
Device Name fields.
If the device is not in the list, click Refresh. If it still does not appear
, fill in these fields
manually.
5. From the Priority list, select the priority for Internet access for this device’s traffic relative to
other applications and traffic.
The options are Low, Normal, High, and Highest.
6. Click Apply to save this rule to the QoS Policy list and return to the QoS Setup screen.
7. In the QoS Setup screen, select the T
urn Internet Access QoS On check box.
8. Click Apply.
To Next Page
Loading...
Need help?
General
