Figure 2. Back panel model MS510TXM
Hardware overview of model MS510TXUP
Model GS510TXUP provides eight Gigabit Ethernet Ultra60 PoE++ (802.3bt) multispeed
copper ports and two dedicated SFP+ fiber uplink ports that support 10G and 1G. Four
of the multispeed copper ports support 2.5G, 1G, and 100M and each of the other four
multispeed copper ports support 10G, 5G, 2.5G, 1G, and 100M. This model can supply
up to 60W PoE++ to each copper port, with a maximum PoE power budget of 295W
across all active PoE++ ports.
Front panel model MS510TXUP
The following figure shows the front panel of model MS510TXUP.
Figure 3. Front panel model MS510TXUP
The following table describes the components on the front panel from left to right. The
components are clearly labeled on the front panel.
Table 3. Front panel components model MS510TXUP
DescriptionComponent
Power LED, Fan LED, and PoE Max LED.
For more information about the LEDs, see LEDs model MS510TXUP on page 15.
System LEDs
Recessed multi-function Reset button (see Multi-function Reset button on page 18).Reset button
Hardware Installation Guide14Hardware Overview
8-Port Multi-Gigabit/10G Ethernet (Ultra60 PoE++) Smart Managed Pro Switch with 2 SFP+ Ports
To Next Page
Loading...
Need help?
General