NETGEAR N450 WNR2500 - Page 59

genie ADVANCED Home
59
N450 Wireless Router WNR2500
The screen adjusts:
5. In the QoS Policy for field, type a descriptive name for the LAN port.
6. From the Ethernet LAN port list, select the LAN port (1, 2, 3, or 4) for which you want to
configure the QoS policy.
7. From the Priority list, select the priority that this traffic should receive relative to other
applications and traf
fic when accessing the Internet. Select Highest, High, Normal, or Low.
8. Click the Apply button.
The rule is saved in the QoS policy table on the QoS Setup screen.
Create a QoS Rule for a MAC Address
 To create a QoS policy for traffic from a specific MAC address:
1. Select ADVANCED > Setup > QoS Setup
.
The QoS Setup screen displays.
2. Click the Setup QoS rule button.
The existing QoS rules display.
3. Click the Add Priority Rule button.
The QoS - Priority Rules screen displays.
4. In the Priority Category list, select MAC Address.